Voltage: AC 180275V How Wireless Switch Works? Switch: Self-powered RF transmitter, Place anywhere in your house 2. Receiver: Accept transmitter (switch) signal to switch power on/off to light.(linked between power and lamp) 3. One receiver can be paired with up to 8 switches. Up to 1640ft (500m) wireless range in open area, 130ft (40m) wireless range indoor with obstacles. Works great in wet environments like bathroom?
Blue LED indicator shows you the working status of the switch? Question:Does this wireless switch needs wifi?
Answer:Not at all, it's RF signal and works incredibly well over long distances. Can this be used in place of a normal light switch?Pls install wireless receiver with on function at the front end of the lamp and program the receiver with switch. Question:Does this have a dimming function?
Question:Will this work to run an outside light fixture? Answer:As long as the receiver is in waterproof place, it won't be problem. DIY Your Switch System One switch can be paired with multiple receivers simultaneously. Encrypted connection, no signal interferences between switches. 1, Wiring: The black and white wires correspond to the lamp and the red (to power) and blue (neutral) go to the wires inside the junction box.
2, Setting: Long press the receiver button, when the indicator light flashes, loosen your grip, then press the wireless panel switch, done. The strong signal can easily go through walls. Works great in wet environments like bathroom and courtyard. Self-powered switch with CR2032 button lithium battery (included), up to 20 years lifetime. Blue LED indicator shows you the working.
The indicator helps you to find your switch. No need to rebuild your switch system.
The wireless switch is also compatible with the. Need to turn on the. Place this switch anywhere or use it as portable remote controls. More convenient for the elderly, pregnant women, the disabled and children. Gang: 2 Gang Power supply: CR2032 button lithium battery (included) Waterproof rate: IP66 Wireless range: Indoor> 40m, open space> 500m Signal emission current: =30mA Emission voltage: =+15dBm Working frequency: 433.932 +/-75KHz MHz Working temperature: -40?
Humidity: 095% Intensity of pressing of panel: 300 +/-50g Panel lifespan: >600,000 times Battery lifespan: >300,000 times Certification: CE, CQC, FCC, RoHS. Voltage: AC 180275V Power consumption. 1 x 2 Gang Switch (Transmitter), 2 x Receiver, 4 x wire connector, 1 x 3M Adhesive Rubbers, 1 x Use Manual. Step-1: Connect the receiver between the light and the power source. Step-2: Power on electricity, press and hold the setting button on the receiver for 2 seconds.
When the indicator light flashes, it enters into matching code mode, then loosen your finger. Step-3: Press the wireless switch panel that you want to pair.
Use the wireless switch to control the light on or off, indicating that the learning code is successful. (Note: To avoid danger, please turn off all the power and test the power is off before wiring). Adding a switch from a paired switch. Step-1: Press and hold the paired switch panel for about 20s till the LED indicator on switch blinks rapidly.Step-3: Press the new switch. Adding a receiver from a paired switch. Step-1: Press and hold the button on the new receiver you want to add for about 3s till the LED indicator on the receiver blinks.
Step-3: Press the paired switch. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Electrical Sockets, Switches & Accessories\Electrical Switches & Dimmers".
The seller is "ink-depot" and is located in this country: GB. This item can be shipped to United Kingdom.